Power Smart Innovation > Invertoare > Single Phase > Invertor monofazic SN5.0HS

Invertor monofazic SN5.0HS

Descarcă

Detalii tehnice

  • 85~460V Wide battery voltage range
  • Built-in multiple operating modes
  • Switch time to EPS mode within 10ms
  • Extra load capacity under EPS mode
  • DC/AC ratio up to 1.5
  • Built-in arc-fault circuit-Interrupter
  • Fanless & slient design
  • Intelligent monitoring & maintenance
Recommended max. PV power (STC)7500Wp
Max. PV input voltage 1600V
Startup voltage100V
Nominal PV input voltage360V
MPPT operating voltage range 290V~560V
Number of PV inputs2 (2MPPTs, 1/1)
Max. input current per MPPT16A
Max. short circuit current per MPPT25A
Battery typeLi-on
Battery voltage range85V~460V
Max. charge/discharge current25A/25A
Max. charge/discharge power5000W/5000W
Nominal grid output power5000W
Max. grid output power5000VA
Max. grid output current21.7A
Max. input power from grid10000VA
Max. input current from grid43.4A
Nominal grid voltageL/N/PE, 230V
Nominal grid frequency50/60Hz
Harmonic(THD)<3%
Power factor range0.8leading ~ 0.8lagging
Rated output power5000W
Peak output power7500VA, 10s
Back up switch time10ms
Nominal output voltage230V
Nominal output frequency50/60Hz
Max. efficiency97.60%
EU efficiency97.00%
Anti islanding protectionYes
Leakage current protectionYes
PV reverse protectionYes
Short circuit protectionYes
Arc-fault circuit-interrupterYes
RSDOptional
Surge protectionDC II/AC II
Battery reverse protectionYes
Dimensions(W*H*D)470*375*178mm
Weight17kg
Installation methodWall-mounted
TopologyTransformerless
Protection degreeIP65
Operating temperature-25 ~ 60℃
Humidity0~ 100%
Cooling methodNatural
Max. operating altitude4000m (>3000m derating)
DisplayLED+APP
Communication methodWifi/4G/Ethernet,RS485,CAN

IEC 62109-1/2, IEC61000-6, IEC61000-3，IEC62116, IEC61727, IEC61683, IEC60068, IEC61000-3, EN50549-1, IEC/EN62477, VDE4105, C10/11, CEI-0-21, TOR Type A
PTPiREE：2021, AS4777-2, PPDS

(1) Exceeding the maximum input voltage will damage the inverter and trigger its self-protection mechanism.
(2) DC input voltage beyond the MPPT operating voltage range will cause the inverter to be out of work.